OneCNC Official Blog

OneCNCXR3 Multi-Axis Increases Efficiency

With the recent release of OneCNCXR3 New simulation and rest verification the traditional barriers that only so-called high-end CAD-CAM could include such major features were removed.

OneCNCXR3 now includes full metal removal and rest simulation in all Mill, Lathe, and Mill-Turn products including multi-axis as standard. With OneCNCXR3 no extra modules or third party add on products are required, all features are seamlessly included.

The benefits of OneCNCXR3 multi axis include:

1. Full solids based metal removal simulation
2. Full solids based part, machine and fixture preview
3. Full solids based part rest verification
4. Hole feature recognition on all planes
5. High speed 2D and 3D machining
6. High speed 2D and 3D rest re-machining
7. Solids and multi-surface roughing and finishing
8. Machine wireframe geometry
9. Automated un-wrap function
10. Wrap a toolpath around a diameter using wrap machining
11. Automated smart plane position recognition
12. Machine from stock model

Here we showcase some of the OneCNCXR3 4 xis machining features.

OneCNCXR3 4 Axis Positional machining:

OneCNCXR3 4 Axis Simultaneous machining:

OneCNCXR3 4 Axis Wrap Machining:

For any further information on OneCNCXR3 Multi-Axis machining or details on any of the OneCNC products contact your OneCNC sales office and find out just how competitive the software solutions are.

Contact OneCNC Sales

OneCNCXR3 Tips on using the Interface M5

There are 2 movies of Tips on using the OneCNCXR3 user interface. Although it is very easy to use the OneCNCXR3 user interface these tips should help you become familiar even sooner than you think.

OneCNCXR3 Tips on the user interface movie (a)

OneCNCXR3 Tips on the user interface movie (b)

OneCNCXR3 Tips on Introduction M15-2

Here are some tops to get you started using OneCNCXR3.

OneCNCXR3 Introduction tips (a)

OneCNCXR3 Introduction tips (b)

OneCNCXR3 Tips using CAM part 1, 2, 3

There are 3 separate 2.5 D parts here to set you going with this type of work. These are parts drawn in previous exercises in introduction to CAD geometry.

Here is part 1 (a)

Here is part 1 (b)

Here is part 2 (a)

Here is part 2 (b)

Here is part 3(a)

Here is part 3(b

OneCNCXR3 Tips on Machining a Solid M1

These Tips consist of 4 movies Part (a) Part (b) Part (c) and Part (d) with and cover tips on how to prepare and machine an imported solid part in OneCNCXR3.

The first one is Part 1 (a)

The second movie Part 1 (b)

The third movie Part 1 (c)

And the fourth movie Part 1 (d)